Description
In Absolute mode, all coordinates are interpreted as positions in the logical coordinate space.
In Relative mode, all coordinates are interpreted as relative to the last position.
Usage
M316 [<value>]
Parameter
[<value>]
0: Absolute mode (default)
1: Relative mode
Description
Read current position (mm) in current positioning mode.
Usage
M317
M317 [T<value>]
Parameter
[T<value>]
Read current position automatically every value milliseconds.
value is the time in millisecond.
Description
Set the Pulses per one millimeter value.
Usage
M318 S[<value>]
Parameter
[<value>]
(pulse/mm)
The default value is 5.12 pulse/mm.
Description
Read the proximity sensor value.
Usage
M319 [<value>]
Parameter
[<value>]
value = V: Read the proximity sensor value.
value = T: Read the proximity sensor value automatically every time the value of the sensor changes from 0 to 1 or 1 to 0.