Description
Slider will move back to original position at default speed
Usage
M320
Description
Set the slider's speed when it moves.
Usage
M321 [<value>]
Parameter
[<value>]
Speed in mm/s
Description
Slider will move to a specified position relative to the home point.
Usage
M322 [<value>]
Parameter
[<value>]
Position in mm
Description
Normally, the motor will hold the position of the slider. After receiving this command, the motor will release and the slider can be free.
Usage
M323
Description
Set the slider's acceleration when it moves.
Usage
M324 [<value>]
Parameter
[<value>]
Acceleration in mm/s²