Description
Set the motion mode of the conveyor belt.
Usage
M310 [<value>]
Parameter
[<value>]
0: Auto Mode (Conveyor will run continuously and its speed is adjusted by rheostat)
1: Control Mode (Conveyor will be controlled by the signal sent to the Serial port)
Description
Set the speed of the conveyor belt when it is in continuous running mode. This speed will be kept exactly when running. With a positive value it will move in one direction and with a negative value it will move in the opposite direction.
Usage
M311 [<value>]
Parameter
[<value>]
Speed in mm/s
Description
Conveyor will move to a specified position relative to the current position.
Usage
M312 [<value>]
Parameter
[<value>]
Position in mm
Description
Set the speed of the conveyor belt when it is in control mode.
Usage
M313 [<value>]
Parameter
[<value>]
Speed in mm/s